Troubles

Reasons

Treatments

Light source is not bright at night or bright during the day.

The light sensor is malfunctioning, or the plug connecting the sensor has poor contact.

Please check the light sensor or the plug connecting the sensor.

The rotatable bin and the insect-falling tray do not rotate, rotate continuously, or rotate irregularly.

The microprocessor of the control system is faulty, or the rotating motor is damaged.

Please contact the manufacturer directly.

The rotatable bin and the insect-falling tray keep turning or turning irregularly, but the indicator light of the controller changes normally.

The sensor is misaligned.

Adjust the sensor position.

After installation, send 220V mains power supply, but the control system indicator light does not light up.

The power connection, power cord, or switch is in poor contact.

Check, replace and adjust.

There are many trapped live insects.

1. The far-infrared processor is damaged;

2. There are troubles in the insect-falling system.

1. Check the far-infrared processor;

2. Check the insect-falling system.

Can not trap insects.

1. The light source is not bright;

2. The controller is faulty.

1. Check the light source;

2. Please contact the manufacturer directly.

The insect-falling light of the controller is off.

The controller is faulty.

Check the controller.

Trapped insects cannot enter the processing bin smoothly.

The insect-sliding funnel is not smooth.

Clean the insect-sliding funnel.

The whole machine does not work.

1. The power supply is not sent;

2. The insurance is fused;

3. The switch is disconnected.

1. Send the power supply;

2. Replace the fuse tubes (wires);

3. Close the switch.